Walls + Forms expanded its SeküreFrame line with the addition of a backer board profile that allows users to place semi-permanent, diecut graphics behind the frame while leaving the front open for promotions. The front-loading graphic system is designed for interior and exterior applications and features an all-aluminum profile and spring hinges that can be added or removed to create a desired tension. The frame is available with an open back for wall-mounted applications or with a backer. The optional back feature gives users the capability to display a permanent message when the poster is not in place. The backer also can be used to allow for custom-shaped, diecut portions of the back panel to extend past the top/side of the frame. SeküreFrame is available in profile dimensions of 1.25 in. wide x 0.31 in. deep, with 0.05-in. wall thickness and an open back profile width of 1.28 in. (31.8 x 7.9 x 1.3 x 32.5 mm). The frame is offered in 3-mil, clear, satin, anodized or black anodized finishes and holds substrates up to 0.09 in. (2.4 mm) thick. Standard sizes include 8.5 x 11, 11 x 14, 18 x 24, and 36 x 48 in. (215 x 279, 279 x 355, 457 x 609, and 914 x 1219 mm). Walls + Forms Inc., PO Box 741112, Dallas, TX 75374, 972-745-0800, fax: 972-304-8402, e-mail: info@wallsforms.com, Web: www.wallsforms.com.