Press Releases

Stahls’ Announces April 2019 Workshops

Published

5 years ago

March 6, 2019

Stahls’ 2019 “Workshop Wednesdays” educational series continues on April 13 with two special Saturday workshops in its Arizona, California, Florida, Michigan, Ohio, Pennsylvania and Texas showroom and training facilities. Join Stahls’ and Transfer Express for heat printing classes at a location near you. (See the following list for addresses and contact info.)

This month’s sessions are designed to get new heat press owners or anyone new to heat printing off to the best possible start with a comprehensive look at materials, equipment and accessories, techniques and more. In addition to hands-on experience with products and equipment, you’ll receive access to exclusive discounts on products and equipment and samples to take home.

Find out how to get the most out of your investments and set up your operation for success. Check below for class dates, locations and contact information and go to http://bit.ly/stahls-workshops for more details and to register. Reserve your place early; seating is limited.

Heat Printing 101: How to Get Started With Your Heat Press – Beginner

From press setup to transfer selection to loading and application on different items, this demonstration-heavy class takes you through the basics and best practices of transfer printing. You’ll also learn how to make money with number and letter personalization and achieve special effects from bling to distressed looks. The class is open to any new Hotronix heat press owner from beginner to expert.

The class will be held April 13, 2019, from 10 a.m.to 1 p.m., in Arizona, California, Florida, Michigan, Ohio, Pennsylvania and Texas. Cost is $19.95 per person.

Heat Printing 201

Get the scoop on choosing the right decorating method for large, mid-size and small jobs. The class also will explore how to use heat press accessories and platens to customize hard-to-print items and print full color with just a heat press. The class is open to any new Hotronix heat press owner from beginner to expert.

The class will be held April 13, 2019, from 2 p.m. to 5 p.m., in Arizona, California, Florida, Michigan, Ohio, Pennsylvania and Texas. Cost is $19.95 per person.

Find out what’s going on at the Stahls’ location nearest you:

Stahls’ Arizona

6900 W. Morelos Place

Chandler, AZ 85226

(480) 763-1060

Stahls’ California

160 Vander, Unit C

Corona, CA 92880

Stahls’ Florida

949 Beville Road

Building D, unit 3-4

South Daytona, FL 32119

(800) 478-2457

Stahls’ Michigan

6353 14 Mile Road

Sterling Heights, MI 48312

(586) 772-6161

Stahls’ Pennsylvania

135 Wayland Smith Drive

Uniontown, PA 15401

Stahls’ Texas

3680 W. Royal Lane, Suite 115

Irving, TX 75063

(469) 706-0700

Stahls’ Transfer Express

7650 Tyler Boulevard

Mentor, OH 44060

440-918-1900

Let’s Talk About It

Creating a More Diverse and Inclusive Screen Printing Industry

LET’S TALK About It: Part 3 discusses how four screen printers have employed people with disabilities, why you should consider doing the same, the resources that are available, and more. Watch the live webinar, held August 16, moderated by Adrienne Palmer, editor-in-chief, Screen Printing magazine, with panelists Ali Banholzer, Amber Massey, Ryan Moor, and Jed Seifert. The multi-part series is hosted exclusively by ROQ.US and U.N.I.T.E Together. Let’s Talk About It: Part 1 focused on Black, female screen printers and can be watched here; Part 2 focused on the LGBTQ+ community and can be watched here.