Press Releases

Stahls’ Offers How To Get Started Heat Printing Seminar

Published

6 years ago

October 9, 2018

Get off to a good start in heat printing with Stahls’ Workshop Wednesdays November introductory class at a location near you. “Heat Printing 101: How to Get Started With Your Heat Press” covers everything from press setup to choosing the right transfer for any job. Geared toward new press owners, the session includes demonstrations to provide a better understanding of the material being covered.

You’ll find out which transfers are best for which jobs and the difference between various cover sheets and when to use which type. You’ll also learn how to load diverse items onto your press for decorating and how to make money with number and letter personalization. Plus, you’ll get the lowdown on creating bling effects with foil and rhinestones, as well as how to achieve distressed and other fashion finishes with transfers.

The class is open to any new Hotronix® heat press owner from beginner to expert, at a cost of $39.95 per person. Sessions will be held Nov. 7, 2018, from 10 a.m. to 2 p.m. in Stahls’ Arizona, California, Florida, Michigan, Pennsylvania and Texas locations. (See below for addresses and contact info.) For more information and to register, go to https://www.stahls.com/vinyl-cutter-training-equipment-classes.

Find out what’s going on at the Stahls’ location nearest you:

Stahls’ Arizona

6900 W. Morelos Place

Chandler, AZ 85226

(480) 763-1060

Stahls’ California

160 Vander, Unit C

Corona, CA 92880

Stahls’ Florida

949 Beville Road

Building D, unit 3-4

South Daytona, FL 32119

(800) 478-2457

Stahls’ Michigan

6353 14 Mile Road

Sterling Heights, MI 48312

(586) 772-6161

Stahls’ Pennsylvania

135 Wayland Smith Drive

Uniontown, PA 15401

Stahls’ Texas

3680 W. Royal Lane, Suite 115

Irving, TX 75063

(469) 706-0700

Stahls’ Transfer Express

7650 Tyler Boulevard

Mentor, OH 44060

440-918-1900

Let’s Talk About It

Creating a More Diverse and Inclusive Screen Printing Industry

LET’S TALK About It: Part 3 discusses how four screen printers have employed people with disabilities, why you should consider doing the same, the resources that are available, and more. Watch the live webinar, held August 16, moderated by Adrienne Palmer, editor-in-chief, Screen Printing magazine, with panelists Ali Banholzer, Amber Massey, Ryan Moor, and Jed Seifert. The multi-part series is hosted exclusively by ROQ.US and U.N.I.T.E Together. Let’s Talk About It: Part 1 focused on Black, female screen printers and can be watched here; Part 2 focused on the LGBTQ+ community and can be watched here.