M&R (www.mrprint.com) recently added the Diamondback S to its line of automatic textile presses. Diamondback S features a servo index-drive system and is available in six- and eight-color models. It has a maximum image area of 16 x 18 in. (406 x 457 mm) and a maximum platen size of 18 x 22 in. (457 x 559 mm). Diamondback S can be ordered with an additional printhead over the unload station, and it is available in base and enhanced configurations.
M&R (www.mrprint.com) recently added the Diamondback S to its line of automatic textile presses. Diamondback S features a servo index-drive system and is available in six- and eight-color models. It has a maximum image area of 16 x 18 in. (406 x 457 mm) and a maximum platen size of 18 x 22 in. (457 x 559 mm). Diamondback S can be ordered with an additional printhead over the unload station, and it is available in base and enhanced configurations. Both configurations feature pneumatically driven print carriages, microregistration, calibrated squeegee-pressure adjustment, standard M&R three-point platen-leveling bracket with quick release, and rear stroke-length adjustment. The touchscreen display is mounted on an arm that swivels between the load and unload stations. M&R’s Revolver Print Program automatically operates individual printheads in programmed sequence and allows multiple flashing without losing a printing position. Enhanced Diamondback S models add pneumatic frame locks, pneumatic squeegee/floodbar locks, and pneumatic squeegee-pressure regulators.