Stahls’ ID Direct (www.stahls.com) recently introduced CAD-CUT Glow. It’s designed for use with a heat press and vinyl cutter. According to Stahls’, CAD-CUT Glow appears white during the day or in bright lighting and features a lime-green appearance when activated by a black light or UV light. Stahls’ says CAD-CUT Glow cuts and weeds easily and features a smooth, matte finish once applied. It arrives on a pressure-sensitive, frosted carrier and is available by the roll in 1-, 5-, 10-, and 25-yd (0.9-, 4.6-, and 23-m) lengths by 20 in. (508 mm) width.
Stahls’ ID Direct (www.stahls.com) recently introduced CAD-CUT Glow. It’s designed for use with a heat press and vinyl cutter. According to Stahls’, CAD-CUT Glow appears white during the day or in bright lighting and features a lime-green appearance when activated by a black light or UV light. Stahls’ says CAD-CUT Glow cuts and weeds easily and features a smooth, matte finish once applied. It arrives on a pressure-sensitive, frosted carrier and is available by the roll in 1-, 5-, 10-, and 25-yd (0.9-, 4.6-, and 23-m) lengths by 20 in. (508 mm) width. It can be heat-applied to cotton, polyester, and poly/cotton blends.