Workhorse (www.workhorseproducts.com) recently reconfigured its start-up shop packages and now offers four new options. Starter Pack #1 features an Odyssey one-color/one-station bench printer with a Luminator exposure unit and the Super Seca 16 x 16-in. (406 x 406-mm) flash cure. The package has the capacity to print up to 36 one-color prints per hour. Starter Pack #2 adds on to Pack #1 with a vacuum platen that makes it possible to print transfers, signs, and similar flat substrates.
Workhorse (www.workhorseproducts.com) recently reconfigured its start-up shop packages and now offers four new options. Starter Pack #1 features an Odyssey one-color/one-station bench printer with a Luminator exposure unit and the Super Seca 16 x 16-in. (406 x 406-mm) flash cure. The package has the capacity to print up to 36 one-color prints per hour. Starter Pack #2 adds on to Pack #1 with a vacuum platen that makes it possible to print transfers, signs, and similar flat substrates. Starter Pack #3 starts off with a four-color/one-station bench-model Odyssey, the Lumitron screen-exposure unit, an 18 x 18-in. (457 x 457-mm) Super Seca flash, a 20-in. x 5-ft (508-mm x 1.5-m) dryer, and platens for youth apparel, oversize garments, and sleeves/legs. This combination is capable of producing up to 36 multicolor prints per hour. Starter Pack #4 features the Odyssey four-color/four-station floor model, a Lumitron screen-exposure unit, an 18 x 18-in. Super Seca flash, a 20-in. x 5-ft dryer, and a washout sink. It also comes with the same platens as Starter Pack #3. Production capacity is up to 72 prints an hour.